min typ units max performance specification mhz pk-pk lower frequency: upper frequency: tuning voltage: supply voltage: output power: supply current: harmonic suppression (2 nd harmonic): pushing: pulling, all phases: tuning sensitivity: input capacitance: storage temperature range: operating temperature range: load impedance: phase noise @ 10khz offset: mhz mhz vdc vdc dbm ma dbc mhz/v mhz/v dbc/hz pf c c 2496 2704 4.5 0.5 4.75 5.0 5.25 +7.0 35 -15 78 -102 50 15 -40 -45 +85 +90 +9.0 +5.0 phase noise @ 100khz offset: -126 dbc/hz 1.5 1.5 20 -10 12730 commonwealth drive ? fort myers, florida 33913 phone: 239-561-3311 ? 800-237-3061 fax: 239-561-1025 ? www.crystek.com crystek corporation microwave a division of crystek corporation page 1 of 2 phase noise (1 hz bw, typical) tuning curve (typical) phase noise @ 1khz offset: dbc/hz -73 phase noise @ 1mhz offset: dbc/hz -142
13 14 15 16 1234 9 10 11 12 0.000 0.115 0.215 0.315 0.415 0.500 0.380 0.280 0.180 0.080 0.500 5 6 7 8 0.105 0.205 0.305 0.405 0.415 0.315 0.215 0.115 0.000 pad location 0.465 sq (11.81 sq) side view 0.100 (2.54) 0.220 (5.59) product control: crystek part number: revision level: release date: responsible: b c. vales 03-dec-2013 CVCO55CC-2496-2704 unless otherwise specified, dimensions are in: in (mm) pad location dimensions are in: inches specification is subjec t to change without notice 12730 commonwealth drive ? fort myers, florida 33913 phone: 239-561-3311 ? 800-237-3061 fax: 239-561-1025 ? www.crystek.com crystek corporation microwave a division of crystek corporation page 2 of 2 tape and reel direction of feed drawing not to scale 0.1570.004 (4.000.10) 0.059 ? typ (1.50 ?) typ 0.9450.012 (24.000.30) 0.6300.004 (16.000.10) bottom view solder mask gold finish [vt] [vcc] [rf] 0.030 (0.76) 0.040 (1.02) 0.052 (1.32) 0.500 (12.70) 0.500 (12.70) top orientation mark top view crystek cvco55cc 2496-2704 yyww pad connection 2 10 14 others vt rf-output vcc ground
|
